Dental Aligner Sheets

Approx. Rs 600 / PieceGet Latest Price

Product BrochureProduct Details:

Thermoforming sheet (Copolyester) crystal-clear, viscoelastic-hard and break-resistant with insulating foil and excellent dimensional stability.
Erkodur-al is a foil material optimized for the production of aligners. Compared to the proven Erkodur, the material is approximately 35% softer with a correspondingly lower initial force and feeling of tension during insertion. Due to the very flat memory loss curve, the effective force of Erkodur-al lasts comparatively longer.
Enables the efficient production of corrective splints/aligners in series or in larger quantities with the Erkopress 240 pressure forming unit.

Approx. Rs 500 / PieceGet Latest Price

Product BrochureProduct Details:

Tough-hard thermoforming plate, copolyester (PETG), turquoise-transparent, with insulating foil for the fabrication of occlusal splints, moulded pieces, copings, bruxism splints, Michigan splints, stabilisation splints, temporary appliances, Silensor-sl, dressing plates, drilling, planning and X-ray templates, protection splints, correction splints, aligner and retainer.
Medical Device Class 2a

Approx. Rs 170 / PieceGet Latest Price

Product BrochureProduct Details:

Thermoforming sheet (Copolyester) crystal-clear, viscoelastic-hard and break-resistant with insulating foil and excellent dimensional stability.
Erkodur-al (PETC) is a foil material optimized for the production of aligners. Compared to the proven Erkodur, the material is approximately 35% softer with a correspondingly lower initial force and feeling of tension during insertion. Due to the very flat memory loss curve, the effective force of Erkodur-al lasts comparatively longer.


Medical Device Class 2a

Approx. Rs 11,200 / PackGet Latest Price

Product Details:

Snoring is generated in the area of the upper respiratory system. Caused by acceleration of the air flow when the respiratory tract is cramped (pharynx), parts of the soft tissue start to vibrate and cause the snoring noise. The Silensor-sl belongs to the mandibular advancement splints. These devices prevent the lower jaw to fall back during sleep. Clinical tests give proof of the effectiveness of mandibular advancement splints, amongst them also the especially comfortable Silensor-sl.

Approx. Rs 1,800 / PackGet Latest Price

Product Details:

We can undertake bulk orders for supply of Erkodent dental aligner sheets. These are readily available in diiferent materials like PetG, Pet C and TPU. 

Approx. Rs 29,000 / PieceGet Latest Price

Product BrochureProduct Details:

Designed to be spacious, Phrozen’s Post-Curing UV Lamp fits the build volume for all Phrozen 5.5” Printers. This unit provides fast curing by using 365nm, 385nm, 405nm UV-LEDs, and uses plates that rotate 360 degrees to ensure that your models are cured evenly. 

It’s easy to use and has a stable power supply and cooling system which makes it ideal for long-term use. The UV Lamp also comes with a built-in safety interlock system that is applicable for 100-240V 50-60Hz Voltage.

Benefits

•  Great Inner Capacity 17.5 x 14 x 18.5 cm inner capacity, which fits build volume for Phrozen 5.5" Printers.

•  Fast Curing by UV-LEDs We use 365nm, 385nm, 405nm UV-LEDs (60W in total) to cure the inner, middle, and outer layers, respectively.

•  360 Degree All-Around Curing The plate will rotate 360 degree and cure models without any blind spots.

•  Stable Power Supply It has a stable power supply which makes it ideal for long-term use.

•  Easy Operation Phrozen Cure comes with a digital control system. One-click finishes all setup.

Approx. Rs 90 / PieceGet Latest Price

Product BrochureProduct Details:

Field of use:
Occlusal splints, bruxism splints, stabilization splints, orthodontic retainers, miniplast splints, dressing plates, implant guides or other moulded appliances. Also see Thermoforming technique manual and material card.

Material properties:

Properties:
Erkodur is a clear transparent PET-G thermoplastic. The Material is abrasion resistant to the greatest possible extent with excellent properties concerning breaking resistance, elasticity and from stability. Erkodur belongs to the polyester group and is therefore not hygroscopic reactive (no predrying necessary ).The material is highly biocompatible.

Finishing:
(see Thermoforming technique manual) Finishing set Quick 2 (110 877), high polish can be obtained with polishs for plastic. The spacer foil is taken off only after thermoforming and finishing. If adding acrylic moisten the area that has to be adjusted with a little monomer first.

Plastification:
Place the foil so that the spacer/insulating foil is facing the model. For machines without control: Test softness of foil with an instrument. If permanent impressions result, thermoform.

Approx. Rs 90 / PieceGet Latest Price

Product BrochureProduct Details:

Field of use:
Occlusal splints, bruxism splints, stabilization splints, orthodontic retainers, miniplast splints, dressing plates, implant guides or other moulded appliances. Also see Thermoforming technique manual and material card.

Material properties:

Properties:
Erkodur is a clear transparent PET-G thermoplastic. The Material is abrasion resistant to the greatest possible extent with excellent properties concerning breaking resistance, elasticity and from stability. Erkodur belongs to the polyester group and is therefore not hygroscopic reactive (no predrying necessary ).The material is highly biocompatible.

Finishing:
(see Thermoforming technique manual) Finishing set Quick 2 (110 877), high polish can be obtained with polishs for plastic. The spacer foil is taken off only after thermoforming and finishing. If adding acrylic moisten the area that has to be adjusted with a little monomer first.

Plastification:
Place the foil so that the spacer/insulating foil is facing the model. For machines without control: Test softness of foil with an instrument. If permanent impressions result, thermoform.

Approx. Rs 100 / PieceGet Latest Price

Product BrochureProduct Details:

Field of use:
Occlusal splints, bruxism splints, stabilization splints, orthodontic retainers, miniplast splints, dressing plates, implant guides or other moulded appliances. Also see Thermoforming technique manual and material card.

Material properties:

Properties:
Erkodur is a clear transparent PET-G thermoplastic. The Material is abrasion resistant to the greatest possible extent with excellent properties concerning breaking resistance, elasticity and from stability. Erkodur belongs to the polyester group and is therefore not hygroscopic reactive (no predrying necessary ).The material is highly biocompatible.

Finishing:
(see Thermoforming technique manual) Finishing set Quick 2 (110 877), high polish can be obtained with polishs for plastic. The spacer foil is taken off only after thermoforming and finishing. If adding acrylic moisten the area that has to be adjusted with a little monomer first.

Plastification:
Place the foil so that the spacer/insulating foil is facing the model. For machines without control: Test softness of foil with an instrument. If permanent impressions result, thermoform.