Dental Thermoforming Machine

Approx. Rs 5,25,000 / PieceGet Latest Price

Product BrochureProduct Details:

Erkopress motion: Pressure forming device with automated thermoforming process to connect with the existing compressed air system. The medium-wave infrared heating without preheating time, heats up the material not only on the surface but also in-depth.

• ~220 - 240 (100, 110 - 120) Volt, 50 - 60 Hertz, max. 380 Watt
• noise level < 70 dB(A)
• working pressure 6 bar

Approx. Rs 5,75,000 / PieceGet Latest Price

Product BrochureProduct Details:

Erkopress ci motion: Pressure forming unit with automated thermoforming process
with self-sufficient, integrated production of compressed air. The Erkopress ci motion has a powerful, integrated compressor with reserve compressed air. Thereby the unit is independent of a compressed air system that possibly has to be installed.

• ~220 - 240 (100, 110 - 120) Volt, 50 - 60 Hertz
• noise level < 70 dB(A)
• working pressure 6 bar

Approx. Rs 17,50,000 / PieceGet Latest Price

Product BrochureProduct Details:

• Pressure forming device with automated thermoforming process for up to 6 models with base and for up to 9 models without base, to connect with the existing compressed air system.
• The unit works with an overpressure of up to 4,5 bar. It thus meets the desire of many users to thermoform 3d print models with overpressure.

• foil diameter 240 mm, 
• operating voltage: ~220 - 240 (100, 110 - 120) volt, 50 - 60 hertz
• working pressure 4,5 bar, required mains system pressure > 6 bar
• noise level < 80 dB(A)

Approx. Rs 1,25,000 / PieceGet Latest Price

Product BrochureProduct Details:

The Occluform-3 is an occludator that can be integrated in a thermoforming unit to imprint the opposing bite (pat. 19915567) and can only be installed at the Erkoform units serie 3.The construction of the Occluform-3 unit is based on a Bonwill triangle with side length of 11.5 cm and a Balkwill angle of 20°.

Usage

The construction dimensions of the Occluform-3 allow a bite elevation at average values. The elevation of 1 line at the supporting pin corresponds to approx. 1 mm bite elevation at the incisal point.
If a construction bite is at disposal the models are articulated in the Occluform-3 using this construction bite